The TMCM-1060 is an intelligent stepper motor controller/driver module using the new outstanding CoolStep™ technology for sensorless load dependent current control. This allows the first time an energy efficient operation of an open-loop stepper motor system. With the advanced stallGuard2™ feature the load of the motor can be detected with high resolution.
The module is designed to be mounted directly on a 57mm or 60mm flange QMot stepper motor. It converts the motor into a compact mechatronic device with bus oriented or stand-alone control. The motor, switches, power and the multi purpose I/Os can be connected with small pluggable connectors. The TMCM-1060 comes with the PC based software development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL™). Using predefined TMCL™ high level commands like "move to position" or "constant rotation" a rapid and fast development of motion control applications is guaranteed. The TMCM-1060 can be controlled using a serial interface. Communication traffic is kept very low since all time critical operations, e.g. ramp calculation are performed onboard. The TMCL™ program can be stored in the on board EEPROM for stand-alone operation. The firmware of the module can be updated via the serial interface.
|Datasheet||2.0 MB||Nov 4, 2016, 1:26 PM|
|TMCL firmware manual V4.45||1.8 MB||Nov 4, 2016, 1:26 PM|
|Setup information||3.3 KB||Nov 8, 2016, 12:17 PM|
|PCN TMCM-1060||50 KB||Feb 1, 2017, 12:18 PM|