TMCM-342 is obsolete and not recommended for new designs.
The TMCM-342 is a triple axis stepper motor controller module for external power drivers with step / direction interface. With its very small size it is dedicated to embedded applications, where de-centralized high power drivers are desired. The board can be connected to a baseboard or customized electronics with a pin connector. The TMCM-342-TMCL comes with the PC based software development environment TMCL-IDE. Using predefined TMCL™ (Trinamic Motion Control Language) high level commands like "move to position" or "constant rotation" rapid and fast development of motion control applications is guaranteed. Host communication is possible via the serial UART interface (e.g. using a RS-232 or RS-485 level shifter) or via CAN. A user TMCL™ program can be stored in the on board EEPROM for stand-alone operation. With the TMCM-342-CANopen it is possible to operate the module in CANopen networks together with other equipment. All time critical operations, e.g. ramp calculation are performed on board. The firmware of the module can be updated via the serial interface.
|Follow up product|
|Phase Current, Peak|
|Hardware manual||820 KB||Nov 4, 2016, 1:33 PM|
|CANopen firmware manual V3.18||2.0 MB||Nov 4, 2016, 1:32 PM|
|EOL TMCM-342||31 KB||Feb 1, 2017, 12:18 PM|
|TMCL firmware manual V1.05||1.8 MB||Nov 4, 2016, 1:32 PM|
|Firmware V4.42||100 KB||Dec 6, 2016, 2:39 PM|
|Firmware V4.44||100 KB||Dec 6, 2016, 2:39 PM|
|Firmware V4.48||100 KB||Dec 6, 2016, 2:39 PM|
|CANopen V3.09||110 KB||Dec 6, 2016, 2:39 PM|
|CANopen V3.05||100 KB||Dec 6, 2016, 2:39 PM|
|CANopen V3.03||94 KB||Dec 6, 2016, 2:39 PM|