Discontinued Products

PD-113 is not longer recommended for new designs. For new Designs please refer to PD-1161. For existing Designs PD-113 will be further available.


The PD-113-56/60-SE PANdrive™ is a full mechatronic solution including a 57 or 60mm flange high torque motor, a motion controller/driver and a integrated sensOstep™ encoder. The PANdrive™ can be controlled via RS232 or RS485 interface. The power supply, interface and the multi purpose I/Os can be connected with small JST connectors. The chopSync™ feature allows high speed movement without resonance problems. The internal sensOstep encoder can be used to detect step loss or to control the target position. PD-113-56/60-SE comes with the PC based software development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL™). Using predefined TMCL™ high level commands like „move to position“ or „constant rotation“ a rapid and fast development of motion control applications is guaranteed. Communication traffic is kept very low since all time critical operations, e.g. ramp calculation are performed on board. The TMCL™ program can be stored in the on board EEPROM for stand-alone operation. The firmware of the module can be updated via the serial interface.

Special Features

  • stallGuard™

Technical Details

Motor Supply7…28.5V7…28.5V7…28.5V7…28.5V
Phase Current, Peak4.0A4.0A4.0A4.0A
RS232 yes yes yes yes
RS485 yes yes yes yes
TMCL yes yes yes yes



Hardware manual pdf1.2 MBNov 3, 2016 12:35 PM


TMCL firmware manual V1.20 pdf1.7 MBNov 3, 2016 12:35 PM
Short specification pdf83 KBDec 20, 2016 1:43 PM