1. Home
  2. Support
  3. Evaluation Kits
  4. TMC5062-EVAL

Evaluation Kits

TMC5062-EVAL

Buy now
TRINAMIC Motion Control - TMC5062-Eval

The TMC5062-EVAL allows you to explore all functions of the TMC5062-LA.

The TMC5062-EVAL-KIT is a set of one MCU board Landungsbrücke, an Eselsbrücke bridge board and one TMC5062-EVAL driver board. It allows for a quick and simple start within only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics.

For diagnosis, all signals between MCU and TMC5062 are accessible with probes on the Eselsbrücke bridge board. To simplify the transfer to your own processor platform the MCU board can be disconnected.

All you need to get started is a power supply and Trinamic's free and easy to use TMCL-IDE. This graphical user interface allows quick setup and supports the use of commands in direct mode, monitors real-time behavior visualized in graphs, and logs and stores data. All settings can simply be exported for your own firmware project.

More about the TMCL-IDE

The proven and tested design files of the Evaluation Board can be downloaded free of charge and used or replicated without any restrictions. The Design is thermally optimized and approved.

Special Features

  • DcStep™
  • microstep table
  • ChopSync™
  • CoolStep™
  • short detection
  • SpreadCycle™
  • Stall detection
  • StallGuard2™
Technical Details
Datasheet
Documentation
Drawings
Software

Technical Details

TRINAMIC Motion Control - TMC5062-Eval
TMC5062-EVAL
Statusactive
Motor Supply5…20V
Phase Current, RMS0.76A
Microsteps1…256
USB
DcStep™
microstep table
ChopSync™
CoolStep™
short detection
SpreadCycle™
Stall detection
StallGuard2™

Downloads

Datasheet

File
Type
Size
Date
TMC5062-LA Datasheet 2.0 MBJun 19, 2020, 11:10 AM

Documentation

File
Type
Size
Date
TMC5062-EVAL BOM V1.2 15 KBMay 28, 2019, 1:59 PM

Drawings

File
Type
Size
Date
EAGLE Files V1.2 90 KBSep 6, 2017, 1:52 PM
Layout Data (PDF) V1.2 420 KBSep 6, 2017, 1:52 PM

Software

File
Type
Size
Date
TMC-EVAL.inf 3.3 KBNov 8, 2016, 12:39 PM

Product Support

If you need further Information please head over to our Help Center or contact us directly.

Support
Product Support

Related Products

TRINAMIC Motion Control - TMC5062-LA

TMC5062-LA

The TMC5062 cDriver™ is an integrated motor driver and motion controller solution for CCTV cameras, pumps and other automated equipment applications. The device has two integrated SixPoint™ ramp controllers, microstepping indexers, the sensorless stall detection technology StallGuard2™ and the load dependent speed control DcStep™ and is intended to drive two bipolar stepper motor. The output driver blocks consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC5062 is capable of driving up to 1.5A of current from each output (with proper heatsinking). TMC5062 is designed for a supply voltage of 5...20V. For high reliability requirements an Encoder interface provides feedback over the system status. The device provides a SPI interface for configuration and diagnostics and a step and direction interface.
Details
Landungsbrücke 2.0

Landungsbrücke

The Landungsbrücke is the connection between your desktop computer and Trinamic’s Chip solutions. Just connect the desired board combination and start to discover Trinamic’s unique features. The heart of the Landungsbrücke is a Freescale MK20 cortex M4 processor. A single firmware design covers all evaluation boards of the Trinamic evaluation system. Users can download the latest revisions, modify the firmware or create your own and easily update it via USB. The code of the Landungsbrücke is open source for download. Please note that all official firmware releases can be downloaded below. However, we also release nightly build versions on our GitHub page, which you can find here: Trinamic GitHub
Details
TRINAMIC Motion Control - Eselsbrücke

Eselsbrücke

The Eselsbrücke is a connector board for Trinamic’s evaluation board system. With probes on the "Eselsbrücke" bridge board, all signals between MCU and corresponding evaluation board are accessible. Therefore, it allows quick and simple diagnosis for your application.
Details

Need help?

No worries, everybody gets stuck sometimes. Even with the how-to documentation and FAQ. Simply let us know which questions you have and our engineers will get you the answers to keep you moving.
Contact us