Evaluation Kits

TMC2660-BOB

TRINAMIC Motion Control|TMC2660-BOB

The TMC2660 breakout board is a development board with the dedicated TMC2660-PA chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software. Further information on the chip can be found here:

The TMC2660-PA provides an integrated motor driver solution for Laboratory Automation, 3D-Printing, Scanners and other automated equipment applications. The device has an integrated microstepping indexer, the sensorless stall detection technology stallGuard2™ and the sensorless load dependent current control coolStep™ and is intended to drive a bipolar stepper motor. The output driver block consists of low RDSon TrenchFET power MOSFETs configured as full H-bridges to drive the motor windings. The TMC2660 is capable of driving up to 4A of current from each output (with proper heatsinking). TMC2660 is designed for a supply voltage of 9...30V. The device has a SPI interface for configuration and diagnostics and a step and direction interface.

 

Special Features

  • StallGuard2™
  • CoolStep™
  • SpreadCycle™

Technical Details

TRINAMIC Motion Control|TMC2660-BOB
TMC2660-BOB
Statuspreview
Motor Type
Motor Supply9…30V
Phase Current, RMS2.0A
Microsteps1…256
SPI
Step/Dir
StallGuard2™
CoolStep™
SpreadCycle™

Downloads

Datasheet

File
Type
Size
Date
TMC2660-BOB Datasheet 2.1 MBOct 20, 2017 10:04 AM

Drawings

File
Type
Size
Date
TMC2660-BOB Drawings 9.9 MBOct 19, 2017 10:57 AM