TMCM-140 Change of Crystal

[StepperDriver]

I'm will use the TMCM-140-42-SE in a subsea application. This means that the driver board will be in a oilfilled pressureized box.
Because of that I will need to replace the crystal to another one that can be used in oilfilled pressurezied applications.

I would like to have a circuit drawing of how the crystal is connected to the microcontroller and also the manufacture and the part of the crystal.

[Goeran Eggers (TRINAMIC)]

Please find below an extract from layout of the TMCM-140 electronics with the processor (IC100) and crystal (Q100) nearby.

A 16MHz SMT crystal is used in this design with 4 landing pads (see picture below), crystal package size is 7.5mm x 5mm.

[StepperDriver]

Thanks

Who is the manufacture of the crystal and do you also have the partnumber and as well the value of the crystal capacitors

[Goeran Eggers (TRINAMIC)]

Crystal is Jauch JXS75, crystal capacitors are 10pF each.