Dear Sir,
I am using mini USB want to refresh current TMCM-140-SE--CAN-TMCL firmware into canopen,But it have this error.
TRINAMIC Support Knowledge Base
For quick support, please BROWSE or SEARCH the forum! Please look up the latest manuals before posting.
refresh the firmware
4 posts
• Page 1 of 1
refresh the firmware
by Gavy » 14 Nov 2011, 09:35
- Attachments
-
- TMCM-140.jpg (28.53 KiB) Viewed 456 times
-
Gavy - Power User
- Posts: 97
- Joined: 03 Aug 2007, 10:10
Re: refresh the firmware
by Olav Kahlbaum (TRINAMIC) » 15 Nov 2011, 08:38
Hi Gavy,
this looks as if you are using an outdated version of the TMCL-IDE. Please always use the latest one. And I would also recommend using the latest version of the CANopen firmware (V3.05).
this looks as if you are using an outdated version of the TMCL-IDE. Please always use the latest one. And I would also recommend using the latest version of the CANopen firmware (V3.05).
-
Olav Kahlbaum (TRINAMIC) - Site Admin
- Posts: 3359
- Joined: 11 Aug 2006, 08:02
Re: refresh the firmware
by Gavy » 17 Nov 2011, 05:39
Dear Olav,
I am just using the latest IDE and CANopen firmware (V3.05).It is unsuccessfully .
I am laso used USB-2-X tried to refresh PD-113-57-SE-485,but also has much error
I am just using the latest IDE and CANopen firmware (V3.05).It is unsuccessfully .
I am laso used USB-2-X tried to refresh PD-113-57-SE-485,but also has much error
- Attachments
-
- 3.jpg (27.02 KiB) Viewed 446 times
-
- 2.jpg (28.62 KiB) Viewed 446 times
-
- 1.jpg (25.99 KiB) Viewed 446 times
-
Gavy - Power User
- Posts: 97
- Joined: 03 Aug 2007, 10:10
Re: refresh the firmware
by Olav Kahlbaum (TRINAMIC) » 17 Nov 2011, 08:36
Better use the USB-2-RS485 interface. It will be much faster and more stable.
-
Olav Kahlbaum (TRINAMIC) - Site Admin
- Posts: 3359
- Joined: 11 Aug 2006, 08:02
4 posts
• Page 1 of 1
Return to Modules / Electrical issues
Who is online
Users browsing this forum: No registered users and 1 guest