TRINAMIC Support Knowledge Base
For quick support, please BROWSE or SEARCH the forum! Please look up the latest manuals before posting.
stallguard: Can Stallguard detect a step loss?
2 posts
• Page 1 of 1
stallguard: Can Stallguard detect a step loss?
by s-chin » 13 Oct 2006, 02:27
Can stallguard function detect a steploss?
- s-chin
- Power User
- Posts: 35
- Joined: 07 Sep 2006, 09:48
- Location: Tokyo, Japan
by TRINAMIC_BD » 13 Oct 2006, 09:37
The main idea behind StallGuard is to enable homing with a mechanical stop. 
It detects the blocking of the axis so that the motor can be stopped. In the same way, a step loss can be detected, but it should to be understood that there are restrictions concerning the motor velocities, where a stall can be detected (please see the FAQ for the StallGuard drivers). StallGuard does not intended to replace encoders.
It detects the blocking of the axis so that the motor can be stopped. In the same way, a step loss can be detected, but it should to be understood that there are restrictions concerning the motor velocities, where a stall can be detected (please see the FAQ for the StallGuard drivers). StallGuard does not intended to replace encoders.-
TRINAMIC_BD - Site Admin
- Posts: 2450
- Joined: 25 Jul 2006, 12:21
- Location: Hamburg (Germany)
2 posts
• Page 1 of 1
Return to ICs / stallGuard and coolStep related issues
Who is online
Users browsing this forum: No registered users and 1 guest