TMC5062-EVAL-KIT

Manual

TMC5062_Eval_Manual.pdf
(2.39MB 23-Dec-14)
TMC5062-EVAL-KIT Stock Buy
TMC5062-EVAL-KIT 8

Description

TMC5062-EVAL-KIT is a set of one MCU Board "Startrampe", a bridge Board and one TMC5062-EVAL driver Board. It allows for a quick and simple start with only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics.

For Diagnosis all Signals between MCU and TMC5062 are accessible with probes on the new "Eselsbrücke" Bridgeboard.

To simplify the transfer to your own processor platform the MCU board can be disconnected.

Additionally required is a Power Supply (max. 20V).

The proven and tested design files of the Evaluation Board can be downloaded free of charge and used or replicated without any restrictions. The Design is thermally optimized and approved.  

TMC5062-EVAL

Product State: preview
Interfaces: TMCL, USB
Phase Current, peak: 1.5A
Phase Current, RMS: 1.1A
RDSon LS: 400mΩ(1)
RDSon HS: 500mΩ(2)
No. Axes: 2
Supported Motor Type: Stepper
Microstep Resolution: 1...256
Velocity Ramps: trapezoidal, sixPoint™
Programmable microstep table
stallGuard2™
coolStep™
chopSync™
spreadCycle™
dcStep™
velocity mode
programmable encoder prescaler
Motor Supply: 5...20V
@25°C
@25°C

Downloads

Documentation

  File Size Modified
TMC5062-EVAL_V11-PCB.pdf 477.28kB 23-Dec-14
TMC5062-EVAL_V11-SCH.pdf 170.98kB 23-Dec-14
 

Latest - .hex files to update Landungsbrücke via TMCL-IDE

  File Size Modified
Landungsbruecke_v02.10_BL.hex 212.65kB 21-Dec-15
 

Manual

  File Size Modified
TMC5062_Eval_Manual.pdf 2.39MB 23-Dec-14
 

Eval Board PC Software

  File Size Modified
TMC-EVAL.inf 3.25kB 23-Dec-14
TMC50xx-EVAL-Setup.exe (v1.0.3.0) 9MB 23-Dec-14
TMC50xx-EVAL-no-installation.zip 7.21MB 23-Dec-14
 

Latest - .hex files to update Startrampe via TMCL-IDE

  File Size Modified
Startrampe_v02.10_BL.hex 232.88kB 21-Dec-15