PD-109-57 V2

PANdrive PD-109-57 V2

Documentation PD-109-57 V2 Short Spec PD-109-57 V2 Manual QSH5718 Motor manual PD-109 Getting Started PD-109 Getting Started (Deutsch) TMCL Firmware Manual Software PD-109 Firmware V3.37 PD-109 Firmware V3.39

Order this product Semiconductorstore, PD1-109 Semiconductorstore, PD2-109 Semiconductorstore, PD3-109 Semiconductorstore, PD4-109 Schuricht, PD1-109 Schuricht, PD2-109 Schuricht, PD3-109 Elfa, PD1-109 Elfa, PD2-109 Elfa, PD3-109

Not for new designs - please refer to PD-1160

The PD-109-57 V2 is a full mechatronic solution including a 57mm flange motor (NEMA23). It combines a convenient controller electronic with a range of different motor types. The PD-109-57 V2 offers four motor torque options and can be controlled via RS232 or RS485 interface. The power supply, interface and the multi purpose I/Os can be connected via two pluggable screw connectors. The PD-109-57 V2 comes with the PC based software development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL™). Using predefined TMCL™ high level commands like "move to position" or "constant rotation" a rapid and fast development of motion control applications is guaranteed. Communication traffic is kept very low since all time critical operations, e.g. ramp calculation are performed onboard. The TMCL™ program can be stored in the on-board EEPROM for stand-alone operation. The firmware of the module can be updated via the serial interface. With the stallGuard™ feature it is possible to detect motor overload or motor stall.

Specifications

Electrical data

• 18V to 55V motor supply voltage
• 3A RMS nominal motor current (5A peak possible)

Interface

• RS232 and RS485
• 2 inputs for reference and stop switches (TTL)
• 3 general purpose inputs and 1 output (TTL)

Features

• up to 16 times microstepping
• memory for 2048 TMCL™ commands
• automatic ramp generation in hardware
• on the fly alteration of motion parameters (e.g. position, velocity, acceleration)
• stallGuard™ for sensorless motor stall detection
• optically isolated inputs
• dynamic current control

Software

• stand-alone operation using TMCL™ or remote controlled operation
• PC-based application development software TMCL-IDE included

Available Models

• PD1-109-57-RS V2   (0.55Nm holding torque, RS-232 and RS-485 interface, TMCL™ firmware)
• PD2-109-57-RS V2   (1.01Nm holding torque, RS-232 and RS-485 interface, TMCL™ firmware)
• PD3-109-57-RS V2   (1.26Nm holding torque, RS-232 and RS-485 interface, TMCL™ firmware)
• PD4-109-57-RS V2   (1.89Nm holding torque, RS-232 and RS-485 interface, TMCL™ firmware) 
  please also refer to the motor datasheet QMot QSH5718 (new series)

Other

• Pluggable screw terminal connectors for all external signals
• RoHS compliant